Steps to overcome Wireless problems
Wireless problems arise from the error factor in the settings for the damage to the wireless adapter itself. If you have problems with your wireless card, maybe the steps below need to be tried to overcome this:
1. Check that you have turned on the wireless button
An indication that wireless lights are on, but if you have pressed the wireless button, but the indicator doesn't turn on or the wireless icon, this is probably because you have not installed the wireless driver on your laptop. So please install the driver first.
2. Turn on Wireless Zero Configuration
if you have done the first step, the indicator is tuned in and the wireless icon has detected the right corner but cannot detect hotspot networks, that's probably because Wireless Zero Configuration has not been activated. to deliver it, follow these steps:
Click Start - Run - type services.msc
Look for Wireless Zero Configuration - right-click - Properties
In the General Tab, change the startup type to Automatic then OK
Back to the Wireless Zero Configuration menu again, in the startup type, click the start button to turn on Service Wireless zero in order to detect hotspot networks.
3. Remove the Remaining Hotspot Network
If your wireless has been able to detect hotspot networks but cannot connect, maybe you need to delete the remnants of the previous connection until it runs out then try again to connect.
4. Reinstall the Operating System
If you have done the steps above, it still doesn't work, maybe the problem is your operating system (Windows) to have problems. By reinstalling Windows it might be able to overcome this.
The tips above are a simple Nutaku fap ceo way to overcome your wireless network problems, if you have tried the method, but it doesn't work, maybe your wireless card is damaged and may need to be replaced.
